Get a Free Quote

Home › Automotive Mold Solutions

Automotive Injection Mold Solutions

As an OEM automotive parts supplier and Tier 1 / Tier 2 mold partner, Gege Mould engineers precision injection molds for every category of automotive component — from large-format bumper tooling to high-precision connector and bracket molds.

Submit an Automotive Parts RFQ

Gege Mould has been a trusted automotive component manufacturer and tooling and mold supplier to the automotive industry for over a decade. Our molds produce parts for passenger vehicles and heavy-duty commercial trucks, serving OEM supply chains and Tier 1 / Tier 2 automotive suppliers across Europe, Asia, and beyond. From automotive plastic parts RFQ to full production tooling programs, we bring engineering discipline and mold-making expertise to every project.

Products We Mold

Each category below represents a distinct injection mold capability — click through for detailed specifications, material options, and representative project experience.

Automotive bumper injection mold — precision tooling for front and rear bumper production

Automotive Bumper Molds

Gege Mould engineers automotive bumper molds for front and rear applications across passenger vehicles and heavy-duty trucks. Our bumper tooling handles large-format parts up to 1,850 mm with multi-cavity configurations, hot-runner sequential valve gating for optimal surface finish, and full PPAP Level 3 documentation. Trusted by OEM supply chains requiring Class-A grained and painted surface quality on every shot.

  • Mold size up to 1,850 × 620 × 510 mm
  • Hot-runner systems with sequential valve gating
  • 4-side slide mechanisms for complex undercut release
  • PPAP Level 3 documentation package
  • Materials: PP, PP-GF, PC/ABS, TPO
Request a bumper mold quote →
Automotive interior parts mold — door panel and trim component injection tooling

Automotive Interior Parts Molds

Our automotive interior parts molds cover door panels, trim components, center console assemblies, and pillar covers. We specialize in grained and textured surface finishes that match OEM interior specifications, with mold designs optimized for low-warpage filling of large thin-wall interior panels. As a custom plastic parts manufacturer, we build tooling for both hard and soft-touch interior surfaces.

  • Door panel, pillar, and console molds
  • Grained, textured, and soft-touch surface finishes
  • Family molds for trim sets with balanced filling
  • Materials: ABS, PC/ABS, PP, PA
Request an interior mold quote →
Automotive exterior parts mold — front fascia and body panel injection tooling

Automotive Exterior Parts Molds

Gege Mould produces automotive exterior parts molds for grilles, mirror housings, wheel arches, rocker panels, and front/rear fascia components. Exterior tooling demands UV-stabilized materials, precise dimensional control for panel-gap consistency, and surface finishes that withstand environmental exposure. We deliver high precision automotive molds with SPI A1 through textured VDI surface options.

  • Grille, fascia, mirror housing, and wheel arch molds
  • UV-stabilized material compatibility
  • Dimensional tolerance ±0.05 mm on critical fit surfaces
  • Materials: ABS, ASA, PC, PP-GF
Request an exterior mold quote →
Automotive exterior body panel injection mold — precision steel tooling for fender, hood, and large-format exterior component manufacturing
Automotive exterior body panel injection mold at the Gege Mould facility. This category of tooling covers fenders, hoods, liftgates, rocker panels, and large-format exterior fascia components — manufactured from high-grade mold steels with precise dimensional control for panel-gap consistency across the assembled vehicle.
Automotive tail light injection mold — precision steel tooling with polished cavity for optical-grade lighting components

Automotive Lighting Molds

Automotive lighting molds from Gege Mould cover tail light, headlamp, and signal lamp tooling — engineered for the optical clarity, tight tolerances, and complex multi-surface geometries that modern vehicle lighting demands. Our lamp mold portfolio includes single-cavity through multi-cavity configurations for both lens (PMMA/PC) and housing (ABS/PC-ABS) components.

  • Optical-grade cavity finishes with SPI A1 polishing
  • Multi-cavity lens and housing mold configurations
  • Full-width and segmented tail light mold capability
  • Materials: PMMA, PC, ABS, PC/ABS, PBT
Request a lighting mold quote →
Automotive full-width tail light injection mold — large-format one-piece lens mold spanning the full vehicle width
Full-width automotive tail light injection mold at the Gege Mould facility. Modern vehicles increasingly use one-piece tail light designs spanning the entire rear width — these large-format lamp molds require continuous polished cavity surfaces, precise multi-point gating for balanced fill, and dimensional control across spans exceeding 1,200 mm.
Automotive tail light lens injection mold — optical-grade PMMA cavity with SPI A1 polished surface finish
Automotive tail light lens injection mold with optical-grade polished cavity surface. Lamp lens molds demand flawless surface finish — any microscopic cavity defect transfers directly to the lens, degrading optical clarity and light distribution. Gege Mould lamp tooling achieves SPI A1 mirror finishes verified by surface profilometry.
Automotive dashboard mold — large-format instrument panel injection tooling

Automotive Dashboard Molds

Automotive dashboard molds represent some of the largest and most complex injection tools in vehicle production. Gege Mould engineers dashboard tooling with multi-point sequential gating for balanced fill across wide panel spans, integrated cooling circuits for cycle time optimization, and precision-fit interfaces for airbag deployment zones and HMI mounting points. We serve as a Tier 1 automotive supplier partner for complete IP tooling programs.

  • Full instrument panel and dashboard assembly molds
  • Multi-point sequential valve gating
  • Conformal cooling for cycle time reduction
  • Materials: PP, PC/ABS, TPE overmolding
Request a dashboard mold quote →
Automotive engine oil pan injection mold — precision steel tooling for under-hood powertrain component manufacturing

Under-Hood & Powertrain Molds

Gege Mould engineers under-hood and powertrain component molds for engine oil pans, air intake manifolds, engine covers, fluid reservoirs, and HVAC blower housings. These tools must withstand aggressive glass-fiber-reinforced engineering resins at high injection pressures while maintaining dimensional stability across long production runs. Our under-hood tooling uses abrasion-resistant nitrided steels and includes conformal cooling for consistent cycle times.

  • Engine oil pan, air filter housing, and HVAC component molds
  • Glass-fiber-reinforced material expertise (PA66-GF30, PP-GF40)
  • Nitrided steel surfaces for abrasion resistance
  • Materials: PA66, PP-GF, PPA, PBT, PPS
Request an under-hood mold quote →
Automotive engine oil pan injection mold — alternate viewing angle showing mold base construction, guide pillars, and ejection system
Engine oil pan injection mold — alternate viewing angle showing the mold base construction, guide pillar alignment, and ejection system. Under-hood component molds like this are built from abrasion-resistant nitrided steels (typically H13 or S136) to withstand thousands of cycles with glass-fiber-reinforced engineering resins at injection pressures exceeding 1,200 bar.
Automotive connector injection mold — high-precision multi-cavity tooling for electrical connector manufacturing

Automotive Connector Molds

Automotive connector molds demand the tightest tolerances in the industry — often ±0.02 mm or better on pin alignment features. Gege Mould builds high-cavitation connector tooling (up to 32 cavities) with hardened steel construction for long production life. Our connector molds support sealed and unsealed automotive electrical connectors, sensor housings, and wire-to-board interconnect systems with consistent dimensional output across millions of cycles.

  • Multi-cavity up to 32 cavities
  • Tolerance capability ±0.02 mm
  • Hardened H13/S136 steel for high-wear applications
  • Materials: PA66, PBT, PPS, PPA
Request a connector mold quote →
Automotive housing mold — HVAC blower housing and functional component injection tooling

Automotive Housing Molds

Automotive housing molds from Gege Mould cover HVAC blower housings, air filter housings, ECU enclosures, fuse box housings, and sensor casings. Housing tools often require collapsible cores or side-action slides for complex internal geometry. We build injection molded parts manufacturer-grade tooling with conformal cooling channels that reduce cycle times by 15–25% compared to conventional drilled circuits.

  • HVAC, filter, ECU, and sensor housing molds
  • Collapsible core and side-action slide mechanisms
  • Conformal cooling for reduced cycle time
  • Materials: PP-GF30, PA66, PC, PBT
Request a housing mold quote →
Automotive clip mold — high-cavitation small-part injection tooling for fasteners and clips

Automotive Clip Molds

Automotive clip molds are high-cavitation, high-wear tools producing trim clips, wiring harness clips, push-pin fasteners, and interior retention clips. Gege Mould designs clip tooling for fully automated production with robot-compatible ejection patterns. Our clip molds use hardened steel construction to sustain consistent part quality across production runs exceeding one million cycles — essential for Tier 2 automotive supplier programs.

  • High-cavitation up to 48 cavities
  • Hardened steel for million-cycle durability
  • Automated ejection compatible
  • Materials: PA66, POM, PBT, PP
Request a clip mold quote →
Automotive bracket mold — structural and mounting bracket injection tooling

Automotive Bracket Molds

Automotive bracket molds produce structural and semi-structural mounting components for engine bays, chassis attachment points, radiator supports, and sensor mounting brackets. These tools frequently process glass-fiber-reinforced engineering resins requiring abrasion-resistant mold steel. As a plastic parts manufacturer automotive specialist, we optimize gate and rib design for maximum part strength at minimum weight.

  • Engine bay, chassis, and sensor bracket molds
  • Glass-fiber-reinforced material expertise
  • Nitrided steel surfaces for abrasion resistance
  • Materials: PA66-GF30, PP-GF40, PPA, PEEK
Request a bracket mold quote →
High precision automotive mold — tight-tolerance injection tooling for critical components

High Precision Automotive Molds

For applications where standard tolerances are not enough, Gege Mould delivers high precision automotive molds with dimensional capability down to ±0.02 mm. These tools serve optical-grade lamp lens molds, precision gear and actuator components, fuel system parts, and sensor-critical mounting features. Each high precision automotive mold includes full CMM dimensional reports, SPC process capability data (Cpk ≥ 1.67), and complete measurement systems analysis documentation.

  • Tolerance capability ±0.02 mm
  • CMM inspection with full dimensional reporting
  • SPC and MSA documentation included
  • Materials: PMMA, PC, PEEK, PPS, PPA, LCP
Request a high-precision mold quote →
Large size automotive injection mold — heavy-format tooling for truck and large vehicle components

Large Size Automotive Injection Molds

Gege Mould is equipped for large size automotive injection mold programs requiring clamp forces up to 1,600 tons and part dimensions up to 1,500 Ã— 1,000 Ã— 600 mm. These tools serve truck bumper fascia, complete door panel assemblies, underbody shields, and large-format SMC compression molds for exterior body panels. Our large size automotive injection mold capabilities include reinforced mold bases, guided ejection systems, and thermal expansion compensation for dimensional stability under high clamp force.

  • Clamp force up to 1,600 tons
  • Part dimensions up to 1,500 × 1,000 × 600 mm
  • Reinforced mold bases with guided ejection
  • Materials: PP, PP-GF, ABS, PC/ABS, SMC, BMC
Request a large mold quote →

Common Questions From Automotive Buyers

Quick answers to what procurement teams ask before issuing an automotive parts manufacturer RFQ.

Q

Do you supply Tier 1 automotive suppliers directly?

Yes. Gege Mould routinely supplies injection molds to Tier 1 and Tier 2 automotive suppliers, as well as directly to OEM programs. We understand the documentation, quality, and timeline requirements of each tier and adapt our project management accordingly. PPAP, SPC, and full dimensional reporting are standard on every automotive program regardless of supply chain tier.

Q

Can you handle an automotive plastic parts RFQ with full PPAP requirements?

Absolutely. PPAP Level 3 documentation is standard on all our automotive tooling programs. Every mold ships with dimensional results, material certifications, PFMEA, control plans, measurement systems analysis (MSA), and initial process capability studies (Cp/Cpk). Our engineering team is experienced with the submission requirements of European, North American, and Asian OEM supply chains.

Q

What is the typical lead time for a custom plastic parts mold from Gege Mould?

Lead time depends on mold complexity and size. A simple single-cavity connector or clip mold may ship in 4–6 weeks. A medium-complexity interior trim or housing mold typically takes 6–9 weeks. A large-format bumper or dashboard mold program runs 10–14 weeks from design approval. We provide a detailed milestone timeline at quotation and share progress updates throughout the build.

Q

Does Gege Mould offer overmolding and insert molding services?

Yes. Our injection molding production floor supports both overmolding and insert molding processes across a range of tonnages. We routinely run TPE-overmolded dashboard components, insert-molded brackets with metal reinforcement, and multi-material automotive connector seals. These capabilities are available for both prototype and production volumes — discuss your specific multi-material or insert requirements when you submit your RFQ.

Q

How do I get an injection mold quote or submit an automotive mold RFQ?

Visit our RFQ page to submit your part drawing or CAD file. Our engineering team reviews every automotive injection mold RFQ within 48 hours and provides a detailed quotation covering mold design, steel selection, estimated cycle time, and lead time. For urgent programs, call us directly at +86-13634093666. We ship injection molds globally from our mold factory in Taizhou, China — serving automotive OEM, Tier 1, and Tier 2 buyers across 30+ countries.

Ready to Source Your Next Automotive Mold Program?

Send us your part drawing or CAD file. Our engineering team reviews every automotive parts manufacturer RFQ and responds with an initial assessment within 48 hours.

Submit Your Automotive RFQ